Installation Instructions

Modular Wiring

Materials List

You Will Need:

  • Binder Post
  • Modular Whip
  • Junction Box
  • Drill
  • Safety Glasses
  • Screws
  • Electrical Tape


Which is Not a Necessary Material?

  • Electrical Tape
  • Drill
  • Table Saw
  • Safety Glasses
  • Junction Box

Installation Process

Transcript

  • Install the Junction Box Into the Binder Post
  • Screw Box to Binder Post
  • Add Modular Wiring (PD 3)
  • Use One Hole Straps to Fasten Wiring to Binder Post. 8 Inches from the Top and 8 Inches from the Bottom.
  • Add Top Piece of Snap
  • Strip and Curl the Wiring
  • Connect the Exposed Wires to the Receptacles
  • White Wire to Silver Screw
  • Green Wire to Green Screw
  • Black Wire to Bronze Screw
  • Tighten the Screws on the Wires
  • Wrap the Receptacle with Electrical Tape
  • Screw to the Junction Box
  • Add the Cover


Complete Step 3 Instructions

Add Modular Wiring 

Match the Wire Color to the Correct Screw Color

  • White Wire
    Silver Screw
  • Green Wire
    Green Screw
  • Black Wire
    Bronze Screw

You Must Wrap the Receptacle with Electrical Tape after Connecting the Wires.

  • True
  • False