Aerial Rooftop Inspections

Welcome to the Knowledge Assessment for the Airware Aerial Rooftop Inspection training program.

Answer all of the questions to the best of your ability, and then click the Submit All Answers button at the bottom of the page.

Questions

What are the three data products generated from aerial rooftop inspections?

  • High-Resolution Imagery
  • Measurement Report
  • Multispectral Imaging
  • Rooftop CAD Model
  • NDVI Index

What is the make and model of the aircraft in the aerial inspection kit?

  • DJI Inspire
  • Airware Inspire Pro 1
  • DJI Inspire Pro 1 Pro T600
  • DJI Phantom

The minimum lateral distance from obstacles required for a launch and landing location is _______.

  • 3 meters
  • 5 meters
  • 10 meters
  • 20 meters

The minimum vertical distance above an obstacle around your flight plan is_____.

  • 5 meters
  • 10 meters
  • 15 meters
  • 20 meters

What are the three things to check prior to arriving on site?

  • Weather
  • Obstacles
  • Height of Roof
  • TFRs
  • NOTAMs
  • Upload Speed

The required visibility for operating the aircraft is _______.

  • 1000 feet
  • 1 mile
  • 3 miles
  • 10 miles

The required cloud ceiling is ______.

  • 400 feet
  • 1000 feet
  • 1 mile
  • 3 miles

The maximum wind limit for flight operations is _______.

  • 10 knots
  • 20 knots
  • 25 knots
  • 30 knots

The lowest acceptable voltage for operating non-aircraft batteries is ____.

  • 20%
  • 50%
  • 60%
  • 80%

To power on and off the aircraft, press the power button once and hold.

  • True
  • False

You create jobs for aerial rooftop inspections in the Airware Cloud.

  • True
  • False

When creating a job in the Airware Cloud, you can edit the __________ for the first flight, the Photo Survey.

  • camera settings
  • No-Fly Zone
  • survey points
  • flight plan

A _________ represents the boundaries for the flight path of the aircraft.

  • No-Fly Zone
  • geofence
  • vertical offset

A _________ collects optical images of the area to create an Orthomosaic and a point cloud.

  • Photo Survey
  • Point Photo Survey

The flight plan for the initial Photo Survey is auto-generated in the Airware Cloud.

  • True
  • False

For the Photo Survey flight plan, which waypoints are assigned the Photo Survey action?

  • Waypoint 1
  • Waypoint 2
  • Waypoint 3
  • Waypoint 4

What two applications allow you to create image annotations?

  • Airware Cloud
  • SkyVector
  • Fleet Manager
  • Airware Ground Control Station

Once processed, you download the Rooftop CAD Model from the __________.

  • Fleet Manager
  • Airware Cloud Data Page
  • GCS

Where do you download the Measurement Report?

  • Airware Cloud Data Page
  • GCS
  • Fleet Manager

When you ______ a job in the Ground Control Station, all the job information, including the location, geofence, and flight plan, are saved on your computer for working in offline mode.

  • save
  • pin
  • cache
  • open

As long as the job has been approved by Airware, there is no need to check airspace or GPS coverage the day of the job.

  • True
  • False

Flight operations may not proceed in rain but are permitted in light fog.

  • True
  • False

Safe operating temperatures for the aircraft are between _______.

  • 0-120° F
  • 10-100° F
  • 14-104° F
  • 20-120° F

The average flight time that the aircraft can sustain is between _________.

  • 7 and 14 minutes
  • 10 and 14 minutes
  • 10 and 20 minutes
  • 15 and 20 minutes

The most common site survey showstopper is _______.

  • overhanging trees
  • power lines
  • cell tower
  • an inadequate launch/landing site

The distance between the highest point of the roof and launch site is called the ____.

  • vertical offset
  • GSD
  • maximum altitude
  • focal range

The default altitude for the Photo Survey is 40 meters. You measure the height of the tallest obstacle during the site survey at 35 meters. What parameter do you need to adjust in order to ensure that the Photo Survey has a safe altitude of 45 meters?

  • vertical offset
  • altitude
  • GSD
  • focal range

How many waypoints are required for a Photo Survey?

  • Two
  • Three
  • Four
  • Five

You must edit the auto-generated Photo Survey flight plan to adjust what three things?

  • image resolution
  • vertical offset
  • flight plan areas
  • GSD
  • survey points

For Photo Surveys, the Launch and Land waypoints should be positioned outside of the flight plan survey areas.

  • True
  • False

Once the Photo Survey flight plan has been saved, you must upload and activate the flight plan before you can fly the aircraft.

  • True
  • False

Photo Survey image files are transferred from the aircraft to the GCS using __________.

  • Wi-Fi
  • Bluetooth
  • SD Card
  • USB Cable

The __________ button creates a Preview Orthomosaic in the GCS for planning the Point Photo Survey.

  • Generate Report
  • Upload
  • Generate Map Layers
  • Import

The __________ button uploads the Photo Survey images to the Cloud to generate the Orthomosaic, Rooftop CAD Model, and Measurement Report.

  • Generate Report
  • Upload
  • Generate Map Layers
  • Import

Camera 1 is used for the Point Photo Survey, while Camera 2 is used for the Photo Survey.

  • True
  • False

The second waypoint of the Point Photo Survey is where you choose the __________.

  • survey points
  • launch point
  • land point

The aircraft will not recognize the new camera if you do not restart the Airware Connect app after installing a different gimbal.

  • True
  • False

You should upload the Point Photo Survey images to the Cloud _________.

  • immediately after the flight
  • prior to leaving the job site
  • when you return to the office

After importing the image files from the aircraft to the GCS, you should delete the image files from the aircraft SD card.

  • True
  • False

While __________, do not close the Analyze page.

  • planning a flight
  • pinning a job
  • generating the map layer and report
  • syncing with the Cloud

Annotations added to image files in the GCS _______________.

  • will be viewable in the Airware Cloud once the job is synced
  • can only be viewed locally
  • are viewable in the Airware Cloud immediately

If you receive a Low Voltage alert, you should ______________.

  • let the aircraft finish the flight plan
  • immediately press Land Now
  • immediately press Return Home

To resolve ground conflicts when the aircraft is landing, you should press the Pause button.

  • True
  • False

If you encounter an airspace conflict, you should either Return Home or Land Now, depending on the proximity of the encroaching aircraft.

  • True
  • False

When the aircraft detects a diminished GPS signal, the aircraft will ___________.

  • automatically execute a Land Now operation
  • automatically execute a Return Home and Land operation
  • automatically execute a Pause operation
  • continue the flight plan

If you encounter a ground conflict while the aircraft is executing a flight plan, you should press the Pause button and then resolve the ground conflict.

  • True
  • False

____________ every flight.

  • Verify aircraft battery charge is at least 20% before
  • Verify aircraft battery charge is at least 50% before
  • Verify aircraft battery charge is at least 80% before
  • Install a fully charged aircraft battery before

To expedite access to the Rooftop CAD Model, filter the Airware Cloud Data page for the job by ______.

  • Rooftop CAD Model
  • DXF
  • Point Cloud
  • 3D

The Internet upload speed at the job site must be at least _______ to perform the aerial rooftop inspection.

  • 1 Mbps
  • 1.5 Mbps
  • 2 Mbps
  • 3 Mbps

Point Photo Survey flight plans are auto-generated in the Airware Cloud.

  • True
  • False